Matsui DMZ-80 - Maintenance Schedules; Daily Maintenance; Monthly Maintenance; Six Month Maintenance

DAILY MAINTENANCE
MAINTENANCE ITEM: PROCEDURE:
Regeneration filter Blow out with compressed air
Process filter Blow out with compressed air
Regeneration Temperature Confirm set point being reached
Process Temperature Confirm set point being reached
Thermocouple on Drying Hopper Check for damage, replace if necessary
Drying Hoses Check for wear, replace if necessary
MONTHLY MAINTENANCE
MAINTENANCE ITEM: PROCEDURE:
Regeneration filter Blow out with compressed air
Process filter Blow out with compressed air
Regeneration Temperature Confirm set point being reached
Process Temperature Confirm set point being reached
Thermocouple on Drying Hopper Check for damage, replace if necessary
Drying Hoses Check for wear, replace if necessary
Aftercooler Water Supply Check that water valve is open
Magnetic Heater Contactors Check resistance
Regeneration Heater Ohms check
Process Heater Ohms check
Desiccant Rotor Turning or indexing properly
6 MONTH MAINTENANCE
MAINTENANCE ITEM: PROCEDURE:
Regeneration Filter Replace
Process Filter Replace
Regeneration Temperature Confirm set point being reached
Process Temperature Confirm set point being reached
Thermocouple on Drying Hopper Check for damage, replace if necessary
Drying Hoses Check for wear, replace if necessary
Aftercooler Water Supply Clean strainer
Magnetic Heater Contactors Check resistance, replace if necessary
Magnetic Blower Contactors Check resistance, replace if necessary
Regeneration Heater Ohms check
Process Heater Ohms check
Desiccant Rotor Turning or indexing properly
Cabinet interior Vacuum or blow out with compressed air
Nuts and bolts Check for loose nuts and bolts throughout
4