6.07
How to Use the Machine
TI008G0001
The machine can be restarted according to the above sequence, but it will start again only if
the internal pressure has lowered under the maximum allowed value for the re-start (preset
factory data not changeable by the user)
NOTE
MAESTRO
XS
has a control logic that prevents an excessive number of consecutives
starts.
This logic is cleared by the user ’s manual intervention, if he/she acts directly by turning off
and on the machine manually.
WARNING
An excessive number of consecutive starts may damage the main motor.
Operate manually only in case of real need and wait for a reasonable amount of time before
restarting the machine.
The number of starts depends now on many parameters,the rated power,the operation cycle,the
working pressure,and the ambient temperature.
For any requirement,please contact MATTEI.
098
099
To Next Page
Loading...
Need help?
General
