Mauldin M415XT MAINTAINER - Page 55

2/3/2020
Page 55 of 78
Calder Brothers Corporation
Model: M415XT Maintainer
M415XT
Computer Diagnostic
•
Will not be
able to change
bucket speed
• Will not be
able to change
blade lift
rotate speed
Can Rx Data HMI 5
Error
0x8022
•
CAN channel error
•
Machine will
not go into
drive.
•
Check harness between display
and controller.
• Error between Display and Controller.
•
Will not be
able to send
driver
acknowledge
command to
controller.
•
Make sure termination resistors
are used.
• Will not be
able to float
boom
• Will not be
able to float
blade
• Will not be
able to float
scarifier
• Will not be
able to change
joystick mode
• Will not be
able to change
engine RPM
• Will not be
able to engage
work lights
• Will not be
able to engage
beacon
• Will not be
able to use
Regen on
demand
• Will not be
able to skip
intro screens.
Can Rx Data HMI 6
Error
0x8023 • Not used • NA • NA