MAX power MPOP5720/US - Technical Specifications and Compliance; Transmitter and Receiver Specifications; Compliance and Regulations

TRANSMITTER
MPOP5720/US
RECEIVER
MPOP5721/US
Power supply 2 lithium batteries 3V (CR2430) 12 to 24V DC
Power consumption in standby 0A 22mA @ 12V DC
Power consumption when in use 50 mA @ 6V DC max 110 mA @ 12V DC max
Operating temperature -15°C / +55°C -15°C / +55°C
Dimensions (mm) 114 x 60 x 22 125 x 78 x 21
Weight (g) 80g 110g
Frequency (MHz)
868 (EU regulation)
915 (US regulation)
868 (EU regulation)
915 (US regulation)
R & TTE Directive
EN 300 220-1 V2.1.1 (2006-04)
EN 300 220-2 V.2.1.1 (2006-04)
EN 300 220-2 V2.1.2,
EN 301 489-3,
ETSI EN 301 489-3 V1.4.1 (02)
EN 60945
EN 60945 (02)
EN 60950-1: 2006;
CEI 60950-1: 2005
FCC ID: W6Z (Transmitter)
IC: 8220A (Transmitter)
IC: 8220A (Receiver)
1- DESCRIPTION
2- TECHNICAL SPECIFICATIONS
The Max Power radio remote control is designed to work with Max Power’s entire range of tunnel and retractable
thrusters. The remote control can also be used to operate any other onboard equipment for which it may be useful.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) This device may not
cause harmful interference and (2) this device must accept any interference received including interference that may cause
undesired operation.
This product is in compliance with the following regulations:
4