7
2. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS
2. TOOL SPECIFICATIONS
TOOL AIR FITTINGS:
This tool uses a 1/4˝ N.P.T. male plug. The inside diameter should be .28˝ (7mm) or larger. The fitting must be capable of
discharging tool air pressure when disconnected from the air supply.
RECOMMENDED OPERATING PRESSURE:
70 to 100 p.s.i. (5 to 7 bar). Select the operating air pressure within this range for best fastener performance.
DO NOT EXCEED 120 p.s.i. (8 bar).
PRODUCT NO. CN565S CN565D
HEIGHT 12-9/16˝ (320 mm) 12-9/16˝ (320 mm)
WIDTH 5-1/8˝ (130 mm) 5-1/8˝ (130 mm)
LENGTH 10-3/4˝ (273 mm) 10-3/4˝ (273 mm)
WEIGHT 4.9 lbs. (2.2 kg) 4.9 lbs. (2.2 kg)
RECOMMENDED
70 to 100 p.s.i. (5 to 7 bar) 70 to 100 p.s.i. (5 to 7 bar)
OPERATING PRESSURE
LOADING CAPACITY 400 Nails 300 Nails
AIR CONSUMPTION
1.0Rat 90 p.s.i. (6 bar) 1.0Rat 90 p.s.i. (6 bar)
operating pressure operating pressure
q
Frame
w
Cylinder Cap
e
Contact Arm
r
Nose
t
Magazine
y
Trigger
u
Grip
i
Exhaust Cover
o
Trigger Lock Dial
3. FASTENER SPECIFICATIONS
PRODUCT NO. CN565S CN565D
NAIL
WIRE WELDED 1-3/4˝ to 2-1/2˝ (45 to 65 mm) 1-3/4˝ to 2-1/2˝ (45 to 65 mm)
LENGTH
PLASTIC SHEET COLLATED
1-1/4˝ to 2-1/2˝ (32 to 65 mm) ――――――――
SHANK DIAMETER .092˝ to .099˝ (2.3 to 2.5 mm) .099˝ to .113˝ (2.5 to 2.9 mm)
SHANK TYPE Smooth, Ring, Screw Smooth, Ring, Screw
HEAD DIAMETER .197˝ to .236˝ (5.0 to 6.0 mm) .236˝ to .275˝ (6.0 to 7.0 mm)
To Next Page
Loading...
