7
PRODUCT NO. CN890S CN890B CN890
Ⅱ
HEIGHT 14-7/16˝ (367 mm) 14-7/16˝ (367 mm) 14-7/16˝ (367 mm)
WIDTH 5-1/16˝ (129 mm) 5-1/16˝ (129 mm) 5-1/16˝ (129 mm)
LENGTH 13˝ (331 mm) 15˝ (380 mm) 15˝ (380 mm)
WEIGHT 7.3 lbs. (3.3 kg) 8.2 lbs. (3.7 kg) 8.2 lbs. (3.7 kg)
RECOMMENDED
70 to 100 p.s.i. (5 to 7 bar) 85 to 100 p.s.i. (6 to 7 bar) 70 to 100 p.s.i. (5 to 7 bar)
OPERATING PRESSURE
LOADING CAPACITY 300 Nails 300 Nails 300 Nails
AIR CONSUMPTION
2.04Rat 85 p.s.i. (6 bar) 2.04Rat 85 p.s.i. (6 bar) 2.04Rat 85 p.s.i. (6 bar)
operating pressure operating pressure operating pressure
ACCESSORIES Hex. bar wrench
―――――― ――――――
PRODUCT NO. CN890S CN890B CN890
Ⅱ
NAIL LENGTH 1-3/4˝ to 3-1/2˝ (45 to 90 mm) 2˝ to 3-1/2˝ (50 to 90 mm) 2˝ to 3-1/2˝ (50 to 90 mm)
SHANK DIAMETER .099˝ to .148˝ (2.5 to 3.8 mm) .099˝ to .130˝ (2.5 to 3.3 mm) .099˝ to .130˝ (2.5 to 3.3 mm)
SHANK TYPE Smooth, Ring, Screw Smooth, Ring, Screw Smooth, Ring, Screw
HEAD DIAMETER .217˝ to .303˝ (5.5 to 7.7 mm) .236˝ to .278˝ (6.0 to 7.0 mm) .236˝ to .278˝ (6.0 to 7.0 mm)
2. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS
2. TOOL SPECIFICATIONS
TOOL AIR FITTINGS:
This tool uses a 3/8˝ N.P.T. male plug. The inside diameter should be .28˝ (7mm) or larger. The fitting must be capable of
discharging tool air pressure when disconnected from the air supply.
RECOMMENDED OPERATING PRESSURE:
CN890S and CN890
Ⅱ
: 70 to 100 p.s.i. (5 to 7 bar), CN890B: 85 to 100 p.s.i. (6 to 7 bar). Select the operating air pressure within
this range for best fastener performance. DO NOT EXCEED 120 p.s.i. (8 bar).
To Next Page
Loading...
