Need help?Do you have a question about the Max G Series and is the answer not in the manual?
General| Brand | Max |
|---|---|
| Model | G Series |
| Category | Measuring Instruments |
| Language | English |
Key capabilities of G-Series flow meters, including high pressure operation and fluid compatibility.
Highlights of the transmitter, such as high resolution measurement and advanced signal processing.
Functionality to prevent false outputs from low flow rates or hydraulic noise.
Procedures for confirming parameters and initiating flow through the meter.
Procedure for replacing the transmitter mechanically.
Wiring details for frequency and analog output signals.
Guidelines for operating the transmitter in high ambient and fluid temperatures.
Recommended actions for correct installation and system integrity.
Critical actions to avoid during installation to prevent damage or malfunction.
Causes and solutions for issues related to lack of flow or excessive pressure.
Addresses scenarios where flow is present but the transmitter shows no output.
Explains and resolves discrepancies where output reading exceeds actual flow.
Explains and resolves discrepancies where output reading is below actual flow.
Details on authorized repairs and the impact on product warranty.
Covers transmitter voltage, current, and analog resolution parameters.
Technical specifications specific to frequency output transmitter models.
Details ambient and process fluid temperature limits for transmitter operation.
Describes selectable anti-dither settings and signal filtering options.
Explains the function and status indication of the Output (D1) and Rotation (D3) LEDs.
Discusses factors affecting signal stability and methods for noise reduction.
To Next Page
