To Next PageTo Next Page
Need help?Do you have a question about the Max Twintier RB441T and is the answer not in the manual?
Guidelines for maintaining a clean and safe work environment.
Precautions for safe electrical operation and preventing shocks.
Advice on staying alert, using PPE, and avoiding accidents.
Guidelines for charging, using, and handling battery packs safely.
Check screws and parts for damage or looseness before assembly.
Properly set switches and remove battery when not in use.
Avoid contact with arm and curl guide during operation.
Keep hands clear of the tiewire during operation.
Prevent accidental injury by not pointing the tool at people.
Avoid accidental tying by keeping fingers off the trigger when not in use.
Discontinue use if tool is not in good working order or shows abnormalities.
Stop use if tool operates without trigger pull or shows unusual heat/smell.
Use only the specified battery pack to avoid damage or fire.
Detailed precautions for charging the battery pack.
Charge from standard AC outlets to prevent overheating.
Avoid short-circuiting battery terminals to prevent overheating and damage.
Detailed steps for operating the rebar tying tool, including angle and alignment.
Troubleshooting guide for warning buzzer types and their causes.
Troubleshooting common malfunctions when no buzzer is active.
General
