Max Tapener HT-A User Manual

取扱説明書
INSTRUCTION MANUAL
警告
WARNING
●使用前に必ず取扱説明書を読む。
●使用前に正常に作動するか必ず確認する。正常に作動しない場合は絶対に使用しない。
●マガジンユニットの先端付近にはギザ刃及びステープルの射出口があるため絶対に指を当て
ない。
●異常を感じたら絶対に使用しない。
●カラ打ちを絶対にしない。
●ギザ刃は指定のものを必ず使用する。
●Be sure to READ the Instruction Manual.
●Prior to using, be sure to check whether the machine functions properly. If not, NEVER use it.
●NEVER apply your fingers to near the front end of the magazine unit because it has a serrated blade and a staple
ejection port nearby.
●NEVER use the machine when you feel anything wrong.
●NEVER try to shoot stapes unloaded.
●Be sure to USE the specified serrated blade.
●この取扱説明書は常時内容が確認できるよう保管してください。
●本機の仕様は機能向上のため、予告なしに変更することがあります。
●Store the Instruction Manual so that you can always confirm its contents.
●The specifications of the machine are subject to change without prior notice due to
improvement of the functions.

Max Tapener HT-A Specifications

General

Brand	Max
Model	Tapener HT-A
Category	Tools
Language	English

Summary

General Safety Warnings and Precautions

Critical Safety Instructions

Essential warnings including reading the manual, checking operation, avoiding contact with moving parts, and not dry firing.

Manual Handling and Specification Notes

Guidance on storing the instruction manual and a notice about potential specification changes.

Names of Each Part

For Safe Operation

Prior to Work

Pre-operation checks and safety measures, including staple and blade selection, and function verification.

During Work

Safety guidelines to follow while operating the machine, such as avoiding double stapling and dry firing.

After Work

Post-operation procedures including removing consumables and lubricating moving parts for maintenance.

Specifications

How to Use

Loading Staples

Step-by-step instructions for correctly loading staples into the magazine unit.

Loading Tape

Detailed guide on how to insert the tape into the A-type handle unit and its path.

Pulling Out Tape

Procedure for releasing the tape catch to draw out the tape for use.

Binding Method

Instructions on how to press the tape against the object and squeeze the handle to bind.

Replacing Serrated Blade

Guidance on when and how to replace the serrated blade, emphasizing safety and correct tools.

Fixing Staple Jams

Steps to clear jammed staples from the staple ejection port using a tool.

After Use

Lubrication

Instructions for lubricating slide parts to maintain machine performance after each use.

Exploded View and Parts List

Exploded View Diagram

A visual representation of the machine's components with index numbers for identification.

Parts List HT-A (N)

A detailed list of all parts for model HT-A (N), including part numbers and compatibility indicators.