17
13.STORAGE
Do not store the tool in a cold weather
environment. Keep the tool in a warm area.
When not in use, the tool should be stored in a
warm and dry place. Keep out of reach of
children.
REMOVE REEL OF TIEWIRE
When you have finished the Tiewire, remove the
reel from the tool.
STORE THE TOOL
When you have finished tying work or when the
tool will not be used for a while, set the Main
switch (Fig.1.
e
) at "OFF", the Trigger lock
(Fig.1.
2
) at "LOCK" and remove the Battery pack
(Fig.1.
5
). The tool and accessories should be
stored in a well-ventilated dry place where the
temperature will not exceed 104°F (40°C).
The Battery pack with the Pack cap (Fig.2.
k
) to
prevent short circuits should be stored in a well-
ventilated dry place where the temperature will
not exceed 86°F (30°C).
To Next Page
Loading...
Need help?
General
