i-SHWAK V4 Inverter air/water chillers and heat pumps with wall-mounted indoor unit and remote condensing outdoor unit
30
An incorrect decommissioning of the appliance may create serious environmental damage and endanger people’s
safety. Therefore, it’s recommended that the unit shall be disposed only by authorized persons and technical training
who has followed training courses that is recognized by the competent authorities.
It is required to follow the same precautions described in the previous paragraphs.
Pay special attention during the disposal operation of the refrigerant gas.
14 TECHNICAL DATA
14.1 PERFORMANCE DATA
Cooling capacity
(1)
min/nom/max
Cooling capacity
(2)
min/nom/max
Heating capacity
(3)
min/nom/max
Heating capacity
(4)
min/nom/max
Energy efficiency
Water temp. 35°C / 55°C
Cooling capacity
(1)
min/nom/max
Cooling capacity
(2)
min/nom/max
Heating capacity
(3)
min/nom/max
Heating capacity
(4)
min/nom/max
Energy efficiency
Water temp. 35°C / 55°C
Operating conditions:
(1) Cooling: Outdoor air temperature 35°C; inlet/outlet temperature 23/18°C.
(2)
Cooling: Outdoor air temperature 35°C; inlet/outlet temperature 12/7°C.
(3)
Heating: Outdoor air temperature 7°C DB 6°C WB; inlet/outlet temperature 30/35°C.
(4) Heating: Outdoor air temperature 7°C DB 6°C WB.; inlet/outlet temperature 40/45°C.
(5) Cooling: water temperature inlet/outlet 7/12°C
(6) Heating: normal climatic condition; T
biv
=-7°C; eater temperature inlet/outlet 30/35°C
(*) Hz max function enablement
N.B. The performance data are indicative and could be subject to change.
The performances declared in apex (1), (2), (3) and (4) refer to the instantaneous power according to EN 14511.
The declared data stated in the apex (6) is determined according to the UNI EN 14825.