To Next PageTo Next Page
Need help?Do you have a question about the MAXA i-32V504 and is the answer not in the manual?
Instructions on proper storage and accessibility of the user manual for consistent reference.
Explanation of warning and information symbols used throughout the document to ensure operator safety.
Guidelines for operator safety, including PPE, workplace conditions, and refrigerant handling.
Specifies required protective gear like clothing, safety shoes, and gloves for maintenance tasks.
Identification and meaning of safety signs present on the unit for hazard awareness.
Detailed safety information for R32 refrigerant, including hazards, first aid, and handling.
Key warnings and precautions related to the flammability and handling of R32 refrigerant.
Essential rules and precautions to follow during chiller unit installation for safety and proper function.
Specifies the acceptable temperature range for transporting and storing the unit to prevent damage.
Procedures and precautions for safely lifting and moving the unit using appropriate equipment.
Requirements for unit placement, including support and necessary clearances for ventilation and access.
Detailed dimensional specifications for specific models of the i-32V5 series.
Detailed dimensional specifications for specific models of the i-32V5 series.
Detailed dimensional specifications for specific models of the i-32V5 series.
Step-by-step instructions for accessing internal components of specific i-32V5 models.
Step-by-step instructions for accessing internal components of specific i-32V5 models.
Step-by-step instructions for accessing internal components of specific i-32V5 models.
Specifies chemical-physical properties and maximum allowed values for circuit water to ensure performance.
Illustrates a standard plumbing connection configuration for the unit.
Details the system for draining condensate produced by the unit.
Procedures and cautions for filling the water circuit, including pressure and filtration requirements.
Description of service sleeves used for system adjustments like glycol content or topping up.
Function and operation of the air venting valve for removing air from the circuit.
Illustrates the functional operation and component layout for the i-32V5 04 model.
Illustrates the functional operation and component layout for the i-32V5 06/08/SL08 models.
Illustrates the functional operation and component layout for the i-32V5 10/12/SL12/12T/SL12T models.
Illustrates the functional operation and component layout for the i-32V5 14-18T series.
Procedure for safely accessing the unit's electrical panel for wiring operations.
Guidelines for connecting the correct power supply, including voltage and grounding.
Details on connecting various signals and power to the unit's terminal block.
Information regarding the unit's control logic, referencing a separate manual.
Information on fuse specifications and location for electrical protection.
Step-by-step procedure for powering on and initiating the unit's operation.
Instructions for cleaning the unit's finned coil, including methods and anti-corrosion treatment.
Guidance on cleaning the outer casing to prevent corrosion and maintain appearance.
Identification of residual risks that cannot be eliminated during the design stage.
Comprehensive technical specifications for standard i-32V5 unit models.
Technical specifications specific to the silenced versions of the i-32V5 units.
Details on power supply, controller circuits, and fan power for the unit.
Defines the minimum and maximum water flow rates required for proper evaporator operation.
Specifies the permissible temperature range for cooling water production in summer mode.
Specifies the permissible temperature range for heating water production in winter mode.
Outlines operating temperature limits for ambient air in different modes.
Explains how to navigate through the unit's menu system and access parameters.
Details on viewing and editing various setpoints for cooling, heating, and hot water.
Describes how to view and manage triggered alarms and error codes.
Instructions on proper storage and accessibility of the user manual for consistent reference.
Explanation of warning and information symbols used throughout the document to ensure operator safety.
Guidelines for operator safety, including PPE, workplace conditions, and refrigerant handling.
Specifies required protective gear like clothing, safety shoes, and gloves for maintenance tasks.
Identification and meaning of safety signs present on the unit for hazard awareness.
Detailed safety information for R32 refrigerant, including hazards, first aid, and handling.
Key warnings and precautions related to the flammability and handling of R32 refrigerant.
Essential rules and precautions to follow during chiller unit installation for safety and proper function.
Specifies the acceptable temperature range for transporting and storing the unit to prevent damage.
Procedures and precautions for safely lifting and moving the unit using appropriate equipment.
Requirements for unit placement, including support and necessary clearances for ventilation and access.
Detailed dimensional specifications for specific models of the i-32V5 series.
Detailed dimensional specifications for specific models of the i-32V5 series.
Detailed dimensional specifications for specific models of the i-32V5 series.
Step-by-step instructions for accessing internal components of specific i-32V5 models.
Step-by-step instructions for accessing internal components of specific i-32V5 models.
Step-by-step instructions for accessing internal components of specific i-32V5 models.
Specifies chemical-physical properties and maximum allowed values for circuit water to ensure performance.
Illustrates a standard plumbing connection configuration for the unit.
Details the system for draining condensate produced by the unit.
Procedures and cautions for filling the water circuit, including pressure and filtration requirements.
Description of service sleeves used for system adjustments like glycol content or topping up.
Function and operation of the air venting valve for removing air from the circuit.
Illustrates the functional operation and component layout for the i-32V5 04 model.
Illustrates the functional operation and component layout for the i-32V5 06/08/SL08 models.
Illustrates the functional operation and component layout for the i-32V5 10/12/SL12/12T/SL12T models.
Illustrates the functional operation and component layout for the i-32V5 14-18T series.
Procedure for safely accessing the unit's electrical panel for wiring operations.
Guidelines for connecting the correct power supply, including voltage and grounding.
Details on connecting various signals and power to the unit's terminal block.
Information regarding the unit's control logic, referencing a separate manual.
Information on fuse specifications and location for electrical protection.
Step-by-step procedure for powering on and initiating the unit's operation.
Instructions for cleaning the unit's finned coil, including methods and anti-corrosion treatment.
Guidance on cleaning the outer casing to prevent corrosion and maintain appearance.
Identification of residual risks that cannot be eliminated during the design stage.
Comprehensive technical specifications for standard i-32V5 unit models.
Technical specifications specific to the silenced versions of the i-32V5 units.
Details on power supply, controller circuits, and fan power for the unit.
Defines the minimum and maximum water flow rates required for proper evaporator operation.
Specifies the permissible temperature range for cooling water production in summer mode.
Specifies the permissible temperature range for heating water production in winter mode.
Outlines operating temperature limits for ambient air in different modes.
Explains how to navigate through the unit's menu system and access parameters.
Details on viewing and editing various setpoints for cooling, heating, and hot water.
Describes how to view and manage triggered alarms and error codes.
General
