MAXA i-32V518T - User Manual

www.maxa.it
i-32V504
i-32V506
i-32V508, i-32V5SL08
i-32V510
i-32V510T
i-32V512, i-32V5SL12
i-32V512T, i-32V5SL12T
i-32V514
i-32V514T
i-32V516, i-32V5SL16
i-32V516T, i-32V5SL16T
i-32V518T
R32
Chiller and Inverter Air/Water heat pumps with axial fan
User-Installer Manual
Model
This manual has been created for informave purpose. The company declines any responsibility for the results of any projecng or any installaon based on the
explanaons and/or on the technical specicaons provided in this manual. It is besides forbidden the reproducon under any form of the texts of the gures
contained in this manual. This manual is a translaon from the ocial italian language version. For reasons of environmental respect the Company will not provide
the hard copy in the original language which could be directly requested or downloaded from the Company website at any me. In case of any dispute, the original
languate manual will be the trusted one. Even paral reproducon PROHIBITED © - Advanx SpA

MAXA i-32V518T Specifications

General

Brand	MAXA
Model	i-32V518T
Category	Chiller
Language	English

Summary

General Safety Regulations

Workers Health and Safety

Guidelines for worker safety, including directive compliance and ergonomic considerations.

Personal Protective Equipment

Specifies essential personal protective equipment (PPE) for maintenance and operation.

Safety Signs

Identification and meaning of safety signs present on the unit.

Refrigerant Safety Data Sheet

Specific R32 Gas Warnings

R32 Gas Charge

R32 Gas Disposal

Safety Rules for R32 Gas Transport and Storage

Installation

General

General instructions and precautions to be followed during unit installation.

Lifting and Handling

Procedures and safety recommendations for lifting and handling the unit.

Positioning and Minimum Technical Clearances

Requirements for unit placement, including clearances and structural support.

Accessing the Inner Parts

Plumbing Connections

Filling the System

Cautions and procedures for filling the water system.

Functional Diagrams

Electrical Connections

Power Supply

Instructions for making correct and safe electrical power connections.

User Terminal Block

Details on the user terminal block connections and their functions.

Startup

Switching on the Unit

Step-by-step guide for powering on and starting the unit.

Maintenance and Periodic Checks

Cleaning the Finned Coil

Instructions for cleaning the unit's finned coil, including anti-corrosion treatment.

Decommissioning

Technical Data

Operating Limits

Evaporator Water Flow Rate

Specifies minimum and maximum water flow rates for the evaporator.

User Interface - Controller

Alarms Menu [ERR]

Details on accessing and viewing alarm codes and information.