MAXA i-32V514T - User Manual

www.maxa.it
i-32V504
i-32V506
i-32V508, i-32V5SL08
i-32V510
i-32V510T
i-32V512, i-32V5SL12
i-32V512T, i-32V5SL12T
i-32V514
i-32V514T
i-32V516, i-32V5SL16
i-32V516T, i-32V5SL16T
i-32V518T
R32
Chiller and Inverter Air/Water heat pumps with axial fan
User-Installer Manual
Model
This manual has been created for informave purpose. The company declines any responsibility for the results of any projecng or any installaon based on the
explanaons and/or on the technical specicaons provided in this manual. It is besides forbidden the reproducon under any form of the texts of the gures
contained in this manual. This manual is a translaon from the ocial italian language version. For reasons of environmental respect the Company will not provide
the hard copy in the original language which could be directly requested or downloaded from the Company website at any me. In case of any dispute, the original
languate manual will be the trusted one. Even paral reproducon PROHIBITED © - Advanx SpA

MAXA i-32V514T Specifications

General

Brand	MAXA
Model	i-32V514T
Category	Chiller
Language	English

Summary

General Safety Regulations and Precautions

Worker Health and Safety Guidelines

Safety and health directives for workers, including handling, equipment, and gas precautions.

Hazard Symbols and Gas Safety

Explanation of safety signs, R32 gas warnings, data sheet, charge, disposal, and transport rules.

Installation Procedures and Requirements

General Installation Guidelines

Essential rules for unit installation, including general precautions and specific handling.

Lifting and Handling

Startup Procedures

Maintenance and Checks

Decommissioning and Risks

Decommissioning and Residual Risks

General Safety Regulations

Worker Health and Safety

Worker safety regulations, including prohibitions and best practices for safe operation.

Personal Protective Equipment

Mandatory personal protective equipment for maintenance and operation.

Worker Health and Safety

Personal Protective Equipment (PPE)

Mandatory PPE for technicians and operators during unit operation and maintenance.

Safety Signs

Safety Signs

Hazard Identification Signs

Refrigerant Safety Data Sheet (R32)

Hazard Identification and First Aid

Details on R32 hazards like asphyxiation, freezing, and necessary first aid measures.

Handling, Storage, and Disposal

R32 Refrigerant Safety

R32 Gas Warnings and Handling

Covers R32 properties, handling precautions, charging, disposal, and transport safety rules.

Installation Requirements

General Installation Precautions

Essential safety precautions and checks before and during installation, including unit integrity and power.

Lifting and Handling

Unit Positioning and Clearances

Installation Site Requirements

Criteria for choosing an installation location, including wall strength, site free from obstructions, and ventilation.

Minimum Clearances

Specifications for required clearances around the unit to ensure proper airflow and maintenance access.

Accessing Inner Parts

Accessing Parts (Models 04-SL08)

Accessing Inner Components

Accessing Parts (Models 10-SL12 T)

Accessing Parts (Models 14-18 T)

Plumbing Connections

Hydronic System Details

System Filling and Discharge

Functional Diagrams

Diagram for i-32 V5 04

Functional Diagrams (06;08;SL08)

Diagram for i-32 V5 06;08;SL08

Functional Diagrams (10 T-SL12 T)

Diagram for i-32 V5 10;10 T;12;SL12;12 T;SL12 T

Functional Diagrams (14-18 T)

Diagram for i-32 V5 14;16;SL16;16 T;SL16 T;18 T

Electrical Connections

Accessing the Electric Panel

Procedure for safely accessing the unit's electric panel for wiring operations.

Power Supply Requirements

Information on correct power supply connection, grounding, and voltage tolerances.

User Terminal Block

Terminal Block Connections

Description of terminals, their connections, and types for user interface and remote control.

Control Systems and Startup

Unit Startup Procedure

Maintenance and Periodic Checks

Safety Precautions for Maintenance

Critical safety measures to be followed by qualified personnel before and during maintenance.

Finned Coil Cleaning

Risk Assessment and Safety Checks

Risk Identification and Precautions

Covers risks from electric panels, maintenance, fans, refrigerant, and water leaks, with precautions.

Refrigerant Circuit Safety Checks

Essential safety measures before working on cooling circuits, including environment checks and fire extinguishers.

System Safety and Component Checks

Electrical Component Safety

Safety checks for electrical components, capacitor discharge, and earth connections.

Component Repair and Wiring

Refrigerant Handling and Leak Detection

Leak Detection Procedures

Methods for detecting refrigerant leaks using electronic and liquid detectors.

Refrigerant Removal and Charging

Steps for safely removing, evacuating, and charging refrigerant, including pressure testing.

Decommissioning and Refrigerant Recovery

Decommissioning Steps

Detailed steps for decommissioning, including familiarity with equipment and electrical isolation.

Refrigerant Recovery Process

Guidelines for safely recovering refrigerant, using appropriate cylinders and equipment.

Technical Data

Standard Unit Technical Sheet

Operating Limits

Evaporator Water Flow Rate

Cooling and Heating Water Limits

User Interface and Controller

Controller Display and Icons

Controller Interface Functions

Menu Navigation and Setpoints

Setpoint Configuration and Alarms

Alarms Menu Overview