i-HWAK V4 Chillers and inverter air / water heat pumps with axial fans
8
For any intervention on the heat pump:
Wear appropriate Personal Protective Equipment (PPE) specifically, gloves and goggles.
Ensure that the workplace is well ventilated. Do not work in closed rooms or ditches with weak air circulation.
Do not work on the refrigerant near open flames or near hot parts.
Avoid any refrigerant leakage into the environment and pay particular attention to leakage from pipes and/or
fittings after evacuating the refrigerant circuit.
4.2 PERSONAL SAFETY EQUIPMENTS
When operating and maintaining the i-HWAK V4 units, use the following personal protective equipment.
Protective clothing: Maintenance men and operators have to wear protective clothing that complies with the basic
safety requirements currently in force. In case of slippery floors, users have to wear safety shoes with non-slip soles.
Gloves: During maintenance or cleaning operation protection gloves have to be used
Mask and goggles: Respiratory protection (mask) and eye protection (goggles) should be used during
cleaning and maintenance operations.
4.3 SAFETY SYMBOLS
The unit features the following safety signs, which has to be complied with:
Presence of moving organs
Presence of surfaces that may cause injures
Presence of hot surfaces that can cause burns
To Next Page
Loading...
