Maxcom MM29D 3G - Transferring Contacts; Contacts Details; Memory Status; Speed Dial

25
- Menu>Phonebook>Options>Copy
- Then select where to copy Contacts from, press
Options>Select>Phone/SIM>OK
- Press Options>Copy
- Use keys Up/Down to select the Contact you wish to copy
- Press Options>Mark>OK
- If you wish to mark another Contacts, repeat the two previous
steps
- Press Opcje>OK to copy marked Contacts
8.7 Transferring Contacts
In order to copy all Contacts, in Idle mode with the handset on the unit
base go to:
- Menu>Phonebook>Options>Transfer
- Then select where to copy Contacts from, press
Options>Select>Phone/SIM>OK
- Press Options>Transfer>Options>Mark All>Options>OK
8.8 Contact’s Details
To view the Contact’s number, in the Phonebook select the Contact
you wish to view, and press Options >Details.
8.9 Memory Status
You can check the memory level on the SIM Card and in the phone
memory. To do so:
- Press Menu>Phonebook>Options>Others>Memory Status
- You can see a number of saved Contacts/total capacity of the
SIM Card and the phone memory.
8.10 Speed Dial
You can assign Contacts to keys 2-9 and M1, M2. To do so select:
Menu>Phonebook>Options>Others>Speed Dial. Use keys Up/Down to
select the key you wish to assign a Contact to. Press: Options>Edit.
- Enter the number and press OK