26
After the bike has been properly assembled, make sure all components are secured correctly, and you
have read this entire manual, please turn the bike on and select a power level following the steps
outlined below:
1.Before use the bike, ensure the key port is locked on the OFF position indicating the battery is off and
locked onto the frame mount.
2. Insert the key and turn clockwise to the “ON” position. Press the button on the battery panel and the
battery indicator will turn green, which means the battery is powered on.
3.Locate the LCD display Remote (near the left handlebar grip). Hold down “Mode” button for
approximately 1.5 seconds to switch the display on. Long-press it to switch the display off. When the
Display is OFF, display and controller no longer consume power from the battery.
M-70
Start-Up Procedure
To Next Page
Loading...
