M-70
General Info
Safety Check Before Each Ride
In addition to regular maintenance, you should also check the condition of your bicycle before each
ride. Any questions, please contact Maxfoot or seek help from a nearby bicycle shop. For more
information, please check the safety checklist before riding.
Electrical System
The electrical system on the electric bicycle is powered by the battery to provide various auxiliary functions
for the rider. Riders should be familiar with the electrical parts of electric bicycles and check them before
riding to ensure safe and comfortable riding.
The front and rear brake levers are equipped with a power cut-off system, which cuts off the motor’s
assistance when in use. Before riding, you should check the mechanical parts of the brake lever and
the power cut-off system to ensure that they are all operating normally.
The throttle is equipped with a switch, please make sure the switch function is normal before use.
When using the throttle, you should twist it slowly. It is not advisable to fully twist the throttle at one time,
otherwise it may cause current overload and trigger the battery overload protection.
If the throttle, brake lever cutoff switches, pedal assistance, or lighting are functioning abnormally,
intermittently, or not working, please discontinue using your ebike immediately and contact the Maxfoot
Support team for assistance.
06
To Next Page
Loading...
