07
General Info
Quick Release Levers
The seat of the electric trike adopts a quick-release structure, which is convenient for the rider to disassemble
or adjust it without tools. Since the quick release lever may become loose during transportation or
riding, regular inspections are necessary.
Tires and Wheels
The wheels should always keep straight when rotating. Once it is found to rotate left or right, swing up
or down, please stop riding immediately and repair or replace it.
Please regularly check whether the tire pressure is sufficiently. When inflating the inner tube, please
ensure that the air pressure inside the tire is the recommended air pressure value, otherwise it will
reduce the tire performance, cause damage to the parts, and affect riding safety.
Suspension, Handlebar, Grips, and Seat Adjustments
The suspension fork will affect the operation and experience of riding, so if you find that the suspension
fork is not working properly, please contact Maxfoot for replacement in time. Make sure that the handlebar
is aligned with the handlebar rod and installed correctly. The height and angle of the handlebars should
be adjusted to suit the rider before riding. If the handlebar cannot be fixed, please contact Maxfoot to
purchase replacement parts. Before riding, make sure that the saddle and seat post are properly
installed and fastened to the trike through the quick release device.
To Next Page
Loading...