Maxi-Cosi Mico AP User Manual

C-5 Preparing Child Restraint to Fit
Your Child
Make these adjustments with your child in the
child restraint before you install in the vehicle.
To Remove Child
Restraint From Base
From the back of the
child restraint, slide the
base release handle up
the back of the child
restraint and lift the
restraint out of the base.
1.
Loosen Harness
Push down on the
harness release lever
(under flap on the front
of child restraint) while
pulling out on both
harness straps.
2.
Release Chest Clip
Press on chest clip
release button and pull
apart.
3.
Unbuckle Harness
Press red button. Pull
buckle tongues out.
Place harness straps
over sides of child
restraint.
4.
Place Child in Child
Restraint
Place the child’s bottom
and back flat against
the child restraint. This
will increase comfort
and allow the harness
straps to be properly
tightened.
5.
C. Basic Use
17
18

Maxi-Cosi Mico AP Specifications

General

Product Category	Infant Car Seat
Brand	Maxi-Cosi
Model	Mico AP
Height Capacity	up to 29 inches
Base	Included
Installation	LATCH or seat belt
Safety Features	Side-impact protection, 5-point harness
Harness	5-point harness
Additional Features	machine washable fabrics
Compatibility	Compatible with many Maxi-Cosi and other strollers (adapter may be required)