C-12 Accessories
Infant Insert: When
using insert, make sure
insert does not cover
your infant’s face in any
way. To adjust the insert,
slide the top together
or apart for proper fit.
Remove the insert for older babies.
To remove insert: Unthread the harness from the
splitter plate (see “Preparing Child Restraint to Fit
Your Child” section), remove insert, and rethread
harness. Reverse to replace insert.
Harness Covers: Harness
covers help provide
comfort to the neck. For
harness covers to fit
correctly, you may have
to fit the upper ends of
the covers through the
harness slots. To remove, unthread harness from
splitter plate (see “Preparing Child Restraint to Fit Your
Child” section). Slide covers off and reattach harness.
Your vehicle’s features may be considerably
different than those pictured here. Consult your
vehicle owner’s manual to help identify your
vehicle’s specific features and locations.
D-1 Understanding Your Vehicle
LATCH Anchors
Located in the
seat bight.
Seat Bight
Vehicle Seat
Belts
Consult your
vehicle owner’s
manual for vehicle
belt use.
D. General Vehicle Installation
Air Bags
Consult your
vehicle owner’s
manual for all air
bag locations.
33
34
To Next Page
Loading...
Need help?
General
