Maxi-Cosi Mico AP User Manual

E-1 Rear-Facing Installation with Base
LATCH Belt
Lap Belt
Lap/Shoulder Belt
E. Installing Rear-Facing
Never place a child rear-facing
in a seating position with an
active frontal airbag. This can
result in serious injury or death.
This child restraint must always face
the rear of the vehicle when installed.
E-2 Preparing to Install Base
with LATCH
Remove LATCH
from Storage
To use LATCH, unhook
LATCH connectors
from base by pressing
the red release button
on each connector.
1.
Thread the LATCH belt
through belt path as
shown.
NOTE: Adjuster MUST
be on the left side of
child restraint as shown.
Do Not twist belt.
2.
47
48

Maxi-Cosi Mico AP Specifications

General

Product Category	Infant Car Seat
Brand	Maxi-Cosi
Model	Mico AP
Height Capacity	up to 29 inches
Base	Included
Installation	LATCH or seat belt
Safety Features	Side-impact protection, 5-point harness
Harness	5-point harness
Additional Features	machine washable fabrics
Compatibility	Compatible with many Maxi-Cosi and other strollers (adapter may be required)