Maxi-Cosi Mico AP User Manual

Do not lubricate buckles and fasteners.
Do not substitute parts or try to modify
the child restraint in any way.
Do not use any child restraint accessory
except those approved by Dorel Juvenile
Group.
Never allow any child to play with this
child restraint; it is not a toy.
Do not remove or cover up any of the
warning labels or other labels on the child
restraint.
Read all instructions for additional
warnings.
C. Basic Use
C-1 Remove and Install the Child
Restraint to Base
To Remove Child
Restraint from Base
From the back of the
child restraint, slide
the base release
handle up the back of
the child restraint and
lift the restraint out of
the base.
To Attach Child
Restraint to Base
Align the slots on the
side of child restraint
with the locking bars in
the base. Push down
firmly on the carrying
handle and the front
of the child restraint
to lock child restraint
to base. You will hear
a “click” when it is
locked.
Pull up on child restraint’s front two corners to make
sure the front of the child restraint is locked to the
base.
11
12

Maxi-Cosi Mico AP Specifications

General

Product Category	Infant Car Seat
Brand	Maxi-Cosi
Model	Mico AP
Height Capacity	up to 29 inches
Base	Included
Installation	LATCH or seat belt
Safety Features	Side-impact protection, 5-point harness
Harness	5-point harness
Additional Features	machine washable fabrics
Compatibility	Compatible with many Maxi-Cosi and other strollers (adapter may be required)