Maxi-Cosi Mico Series User Manual

2. Route Lower Anchor
Belt Through Base Belt
Path
Adjuster
MUST be on the
right side of the base as
shown.
Do not twist belt.
3. Place Base in Vehicle
Rear Facing
Center the base between
the vehicle anchors in the
chosen seating position.
4. Attach Lower Anchor
Connector to Vehicle’s
Lower Anchor
Review your vehicle owner’s
manual for lower anchor
locations and lower anchor
belt use.
Make sure arrows on
connectors are facing up.
Fasten one lower anchor
belt connector to the anchor
located in the vehicle seat
bight. Repeat for other side
of base.
1. Remove Lower Anchor
Belt from Storage
Location
Unhook lower anchor
connectors from base by
pressing the red release
button on each connector.
5. Tighten Belt
Firmly push down and
towards the vehicle seat
back while pulling free end
of belt to tighten.
16
15
continued on next page

Maxi-Cosi Mico Series Specifications

General

Height Limit	Up to 32 inches
Base	Included
Side Impact Protection	Yes
Type	Infant Car Seat
Base Compatibility	Compatible with Maxi-Cosi bases
Harness	5-point
Fabric	Machine washable
Canopy	Adjustable
Infant Insert	Yes
Stroller Compatibility	Compatible with Maxi-Cosi strollers
Additional Features	machine-washable fabrics