Maxi-Cosi Mico Series User Manual

18
continued on next page
17
6. Check Belt Tightness
Hold the base at the belt
path with your weakest
hand.
Push and pull from side to
side. It should not move
more than 1 in. (2.5 cm).
7. With Child Secured in
Child Restraint, Attach
Child Restraint to Base
Pull up on front two corners
of child restraint by child’s
feet to make sure it is locked
to the base.
Carry handle MUST be
upright AND locked when
carrying and when
installed in the vehicle.
WARNING: Failure to securely attach child
restraint to base can result in serious injury or
death.
8. Check Level Line
Depending on your Mico
car seat model, the level-
to-ground line can be in
one of two places.
Repeat steps 3-8 if level
line is not parallel with the
ground.
Adjust the base if needed.
See page 4 on how to
use the base adjustment.
If it moves more than 1 in. (2.5 cm), you can try:
A. Pulling the belt tighter.
B. Reinstalling the base.
C. Changing to a different seating location.
D. Switching to vehicle belt installation.
OR

Maxi-Cosi Mico Series Specifications

General

Height Limit	Up to 32 inches
Base	Included
Side Impact Protection	Yes
Type	Infant Car Seat
Base Compatibility	Compatible with Maxi-Cosi bases
Harness	5-point
Fabric	Machine washable
Canopy	Adjustable
Infant Insert	Yes
Stroller Compatibility	Compatible with Maxi-Cosi strollers
Additional Features	machine-washable fabrics