26
Rear Facing Mode Install using ISOGO (if fitted)
Attach the top tether strap
Attach the top tether strap to the
upper anchorage point in the vehicle.
Attach
Engage
tether
Thread tether through
SMART Guide
®
Take the tether on the door side of
the restraint and thread through the
SMART Guide
®
.
IMPORTANT:
• The tether function MUST be used
for this restraint.
• Thread the tether through the
SMART Guide
®
on the DOOR SIDE
ONLY.
• Only the tether on the side furthest
from the door is to remain in the
conventional position.
• If installed in center of seat, use
ONE SIDE ONLY
Never engage
conventional tether
position on both sides
of restraint.
Never engage tether on
both sides of restraint.
To Next Page
