Maxi-Cosi Pria - Seatbelt Installation Steps

Pull
Press
28
Install using Seatbelt
Open installation door
Step 1. Loosen and un-buckle
harness and remove newborn insert
(Figure 1).
Step 2. Raise the height of the seat
headrest (Figure 2).
Step 3. Unbutton the seat trim on the
backrest (Figure 3).
Step 4. Continue to fold the fabric
down and lift up to open the installation
door (Figure 4).
Rear Facing Mode
Lock installation door
in open position
The installation door can be locked in
open position to allow easy access to
the installation path.
Step 1. Lift the SMART Lock
®
handle
up (Figure 5).
Step 2. Continue to pull the SMART
Lock
®
handle until it reaches the
underside of the open installation door
(Figure 6).
Step 3. Press SMART Lock
®
against
installation door until it catches and
holds the door open (Figure 6).
Figure 2
Figure 5
Figure 1
Figure 3 Figure 4
Press
Figure 6