33
Rear Facing Mode
Pull
Press
Figure 1
Figure 2
How to use
Adjusting headrest
and harness height
Adjusting the headrest height will
simultaneously adjust the harness
height.
Step 1. Estimate harness height based
on child.
Step 2. Press adjuster to release
headrest mechanism, pull or push
simultaneously to adjust headrest up
or down.
Step 3. Release adjuster when correct
height is reached, ensuring the
headrest is locked in position.
Release harness straps
Step 1. Loosen harness straps by
pushing down the harness release
button at the front of the restraint and
simultaneously pulling the shoulder
straps (Figure 1).
Step 2. Release harness by pressing
the red button on the buckle
(Figure 2).
Step 3. Pull the harness straps over
the sides of the child restraint.
TIP Fold back padding inwards
and upwards when headrest
is in the lowest position.
Roll down back padding as
headrest is moved up.
To Next Page
