28
model no. 055-6767-0 | contact us 1-888-670-6682
SAW BLADE WRENCH STORAGE (Fig. 14)
• For convenient storage and prevention of
loss, there is a bracket (1) set on the rear
side of the right sliding fence (2) for storing
the blade wrench (3) when not in use.
THE POWER CORD STORAGE (Fig. 15, 16)
• For convenience and to prevent damage to
the power cord when the mitre saw is not in
use or is in transportation, the rear side of
the slide carriage has two brackets (1, 2) for
winding the cord. (Fig. 15)
NOTE: To rapidly release the power cord,
turn the upper bracket (1) 180°. This will
release the cord. (Fig. 16)
ASSEMBLY
Fig. 14
1
2
3
Fig. 15
Fig. 16
1
2
1