Maxmade BDP-M1061 User Manual (English)

Questions and Answers:

L
Larry BlakeAug 13, 2025
What to do if Maxmade BDP-M1061 has no reaction to the remote control?
- C
  Charles AlvaradoAug 13, 2025
  If your Maxmade Portable DVD Player isn't responding to the remote, try these steps: First, ensure the player is properly connected to a power outlet. Next, check that the batteries are correctly inserted in the remote. Then, point the remote directly at the IR sensor on the front of the player. If it still doesn't work, try replacing the batteries in the remote with new ones.
S
Steven PhillipsAug 17, 2025
What to do if Maxmade Portable DVD Player has no picture or sound?
- K
  Kyle WilsonAug 17, 2025
  If you're experiencing a lack of picture or sound with your Maxmade Portable DVD Player, verify that all connections are secure. Also, ensure that the volume isn't set too low and that both your audio receiver and TV are functioning correctly. Finally, double-check your audio settings to confirm they are properly configured.
A
adamsnathanielAug 21, 2025
What to do if there is no picture on HDMI connection with Maxmade Portable DVD Player?
- J
  James JordanAug 21, 2025
  If you're not getting a picture via HDMI on your Maxmade Portable DVD Player, it could be due to a few reasons. If the player is connected to an unauthorized display device, the video signal might not be displayed. Check the HDMI cable for any faults or damage, and replace it if necessary. If this occurs after changing the resolution, repeatedly press the Resolution button on the remote until the picture reappears.

Maxmade BDP-M1061 Specifications

General

DVD Playback	Yes
USB Input	Yes
SD Card Slot	Yes
Built-in Speakers	Yes
Headphone Jack	Yes
Remote Control	Yes
Screen Size	10.1 inches
Resolution	1024 x 600
Battery	Rechargeable lithium-ion battery
Supported Formats	DVD, CD, MP3