4
the power indicator and LCD screen will be lit up. When the main power switch
key is turned on, the product can be charged and the AC/DC key can be turned on.
2. After the main power button is turned on, you must turn on the AC/DC
key when using this product to power your device. Press the AC/DC button
for 2 seconds to open the corresponding AC/DC output. Then you will nd the
corresponding LED green indicator next to AC/DC button will be lit up. After 15
seconds of use, the backlight of the display screen is closed and any key is
pressed to activate the display screen.
3. If the main power button is turned on, and the AC and DC switch button is
not turned on, then the product will be automatically shut down after 10 minutes
without charging.
4. To save battery power, turn off the product when you are not going to
use it for a long time. Press the AC/DC button for 2 seconds to close the
corresponding AC/DC output. Long press the main power button for 2 seconds
to shut down, then AC and DC have no output, and the display screen and
indicator lights are off. The product cannot be charged when it is off.
Note:
1. Please turn off the product when you don’t use it;
2.Please fully charge the product if you are going to leave it idle for a long
period.
How to charge this product ?
Note: Please charge the product before use; Turn on the product before
charging.
There are 3 ways to charge the product, using AC adapter, solar charging
cable or car charger. First, you need to determine the input source and select a
charger accordingly. Then, connect the charger to the input port of the product
and it will be charged. When the product is being charged, the LCD battery
would ash on the LCD screen. When the product is fully charged, the LCD
battery would stop ashing.
A. Charge with Solar Charging Cable
Place your solar panel somewhere that it can receive direct sunlight and
To Next Page
Loading...
Need help?
General
