Maxon DMD series - Stowing the Retention Ramp

To Next Page

To Previous Page

6. To stow, rotate retention ramp to

retention position and then to the

ﬂ at position on ﬂ ipover as shown

in FIG. 29-1.

RAMP HOOKED TO FLIPOVER

(RH VIEW OF FLIPOVER)

FIG. 29-3

HOOK

RETENTION

RAMP

ROTATING RAMP TO STOWED

POSITION (RH VIEW OF FLIPOVER)

FIG. 29-1

STOWED

7. Push the retention ramp fully into

the catches (FIG. 29-2). Make

sure retention ramp is hooked to

the ﬂ ipover (FIG. 29-3).

STOWING THE RAMP

(TOP VIEW OF FLIPOVER)

FIG. 29-2

CATCH

FLIPOVER

RETENTION

RAMP

FLIPOVER

Other manuals for Maxon DMD series