27
LOADING PLATFORM AT GROUND
LEVEL (RAMP POSITION)
FIG. 27-1
4. Load the platform at
ground level as follows.
Make sure retention
ramps are in the ramp
position (FIG. 27-1). Next,
move carts on the platform
as shown in FIG. 27-1.
If platform is equipped
with cart dishes, ensure
the a set of wheels are
seated in the dishes.
WARNINGS
!
A load should never extend past the edges of the platform. Do not
place unstable loads on platform and do not allow load to exceed
the lifting capacity of the Liftgate. If standing on platform, do not
allow your feet to extend beyond the inboard edge of the platform.
RETENTION
RAMPS
To Next Page
Loading...
