24
CAUTION
!
To prevent injuries caused by tripping and falling, make sure
retention ramps are in the ramp position before walking on and
off outboard end of platform.
WARNING
!
To prevent personal injury & damaged equipment, ramp must
be in retention position when cart is being raised or lowered on
platform.
LOADING OR UNLOADING PLATFORM
To prevent possible injury, never operate control switch while
unfolding the fl ipover or retention ramp.
WARNING
!
UNFOLDING RETENSION RAMP
(RH SIDE SHOWN)
FIG. 24-1
1. If equipped with a fl ipover
and retention ramp, unfold
retention ramp (FIG. 24-1)
by pushing down on
locking arm. Then, pull
strap UP and rotate ramp
UP (FIG. 24-1).
2 PULL
3 ROTATE
1 PUSH
LOCKING
ARM
STRAP
RAMP
FLIPOVER
To Next Page
Loading...
