11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
10
STEP 3 - WELD LIFTGATE TO VEHICLE
1. Remove Split Looms from Mounting Plates
(FIGS. 10-1A & 10-1B). (Split Looms will be
reinstalled later after final welding).
2. Unfold the Platform and Flipover (FIG. 10-2).
PLATFORM & FLIPOVER UNFOLDED
FIG. 10-2
PLATFORM
(UNFOLDED)
FLIPOVER
(UNFOLDED)
LOCKING ANGLES
(REF)
RH SIDE VIEW OF LIFTGATE
FIG. 10-1A
SPLIT LOOMS
MOUNTING PLATES
MOUNTING
PLATE
FIG. 10-1B
MOUNTING
PLATES
To Next Page
Loading...
