Maxon GPT Series - Step 9: Weld Platform Opener to Liftgate

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
21
STEP 9 - WELD PLATFORM OPENER TO LIFTGATE
FIG. 21-1
FLOOR JACK
SUPPORT STRAPS
& SPACERS
(BOTH SIDES)
1. Remove Floor Jack and Hoist
supporting Liftgate (FIG. 21-1).
PLATFORM
2. LOWER the Platform to the ground.
Remove both support straps and
both spacers from Extension Plate
(FIG. 21-2).
FIG. 21-2
3. Fold flipover (FIG. 21-3).
FOLDING FLIPOVER
FIG. 21-3
FLIPOVER