Maxon M-KIT100 - Tools Required for Assembly; Hardware Kits

Page 3 of 10 M-KIT100/101/102 Assembly Instrucons 181-03001
These instrucons must be followed exactly. Failure to follow these instrucons could damage the product or result in injury to persons using or
assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulng from failure to properly
assemble the product in accordance with these instrucons.
Maxon Furniture Inc. Customer Service: 1-800-876-4274
Tools Required for Assembly
Hardware Kits
Please ensure all required pieces are present before beginning assembly. Some steps may require a second
person for assistance.
Panel Hardware (PLNR4236)
Rectangular Worksurface Hardware (UWR2472TM)
Phillips Screwdriver
Level
Drill/Screw Gun
with Phillips bit
Rubber Mallet
Boxcuer
Tape Measure
1/2” Box End or
Adjustable Wrench
Wire Cuers
End Cap
Provided: 4
Used: 2
Top Cap Spacer
Provided: 4
Used: 2
I-Beam Panel Connector
Provided: 24
Used: 24
#8 x 1/2" Phillips Flat Head
Provided: 8
Used: 2
Straight Alignment Bracket
Provided: 4
Used: 1
Lock Bar
Provided: 4
Used: 1
Provided: 1
Used: 0
RH Corner Bracket
Provided: 1
Used: 0
LH Corner Bracket
Provided: 1
Used: 0
#10 x 3/4" Pan Head Screw
Provided: 16
Used: 9