Maxon M-KIT100 - Adding the Countertops; Countertop Bracket Placement and Attachment; Countertop Alignment and Initial Securing

Page 8 of 10 M-KIT100/101/102 Assembly Instrucons 181-03001
These instrucons must be followed exactly. Failure to follow these instrucons could damage the product or result in injury to persons using or
assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulng from failure to properly
assemble the product in accordance with these instrucons.
Maxon Furniture Inc. Customer Service: 1-800-876-4274
Unpack the two LCCT123636TM Countertop 1.
boxes and hardware kits.
TIP! Lay the Countertops on a so surface
unl you are ready to install them.
Place LH and RH Countertop Brackets into the 2.
Panel Slots on the end of a PLNR4236 Return
Panel (Figure 10).
Posion Corner Countertop on the Panels 3.
and align with Brackets.
Aach LH and RH Countertop Brackets to 4.
Countertops with two #10 x 3/4” Pan Head
Screws, installing the screw closest to the
panel rst.
ATTENTION! DO NOT completely ghten
the screws to allow for adjustment.
While ghtening the #10 x 3/4” Pan Head 5.
Screws, pull the RH and LH Countertop
Brackets up in the slots unl they are ush
with the top of the PLNR4236 Return Panels.
TIP! Make sure Bracket teeth are fully
engaged in Panel slots.
Repeat Steps 1-5 to install the second 6.
LCCT123636TM Countertop.
Adding the Countertops
Figure 10
FRONT VIEW
LCCT123636TM
Countertop
RH
Countertop
Bracket
LH
Countertop
Bracket
PLNR4236
Return
Panel
PLNR4236
Return
Panel