the ignition switch, such as a spare accessory
terminal in your vehicle's fuse box.
5) Connect the orange (Batt +) wire to your
vehicle's battery positive (+) terminal or to
a point in the vehicle's fuse box that provides
a continuous source of 12 Volts even when
the ignition is turned off. This connection
provides last channel memory feature.
6) Reconnect the cable to the vehicle's battery
negative (-) terminal.
MOBILE ANTENNA INFORMATION
Your Maxon MCB-30 requires a vehicle mount CB
antenna for operation. An antenna is not included
with your MCB-30 because of varying vehicle
applications, individual needs, and owner cost
preferences.
You may use any standard 50 Ohm vehicle mount
CB/weather antenna system with a PL-259 connec-
tor. Maxon antenna model WTA-4WP may be
obtained from your local Maxon CB distributor/
retailer.
NOTE: When installing a mobile antenna, please
follow the antenna manufacturer's installation
instructions completely. Never operate your
CB radio without an antenna or with a broken
antenna cable. This can result in damage to your
CB transmitter circuitry.
• Connect the antenna securely to the unit's
antenna receptacle
8
To Next Page
Loading...
