Maxon SP-340 User Manual

Operating
Instructions
SP-300 Series
Synthesized Scanning Radio
(Models SP-310, SP-320, SP-330 & SP-340)

Maxon SP-340 Specifications

General

Channels	16
Power	5W
Bands	UHF
Frequency Range	400-470 MHz
Output Power	5 Watts

Summary

About Your SP-300 Series Radio

About Maxon / Topaz3

Information about Maxon's two-way radio equipment and Topaz3 as its exclusive supplier in North America.

Safety Information

Unpacking Information

SP-300 Series Features

Description of Radio Components

Antenna Installation

Installing and Removing the Battery Pack

Attaching and Removing the Belt Clip

Battery Charging and Care

SP-300 Series Operation

Power On-Volume

Instructions for turning the radio on and adjusting the volume control.

Transmit

Guidance on how to transmit, including safety warnings about antenna use.

Receive

How to receive transmissions after finishing a transmission.

Power Off

Instructions for turning the radio off by rotating the control counter-clockwise.

Status Indicators and Audible Alert Tones

Scan Modes

Normal Channel Scan

Initiates scanning through a programmed list of channels.

Priority Channel Scan

Constantly monitors a designated priority channel during scanning.

Other Scanning Features

Details on Look Back, Scan Channel Delete, CTCSS/DCS Scanning, and various TX modes.

Licensing and Service Information

FCC Licensing

Requirements for operators to be properly licensed by the FCC.

Service

Recommendations for returning the radio to a qualified dealer for service.

Recycling/Disposal of Batteries

Software Copyrights

Maintenance

Limited Warranty