EasyManua.ls Logo

Maxon SP-340 - Battery Charging and Care; SP-300 Series Operation; Power On-Volume; Transmit

Maxon SP-340
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Battery Charging and Care
To ensure maximum performance from your radio, the battery pack
must be fully charged before initial use. For continued performance,
periodically discharge the battery completely and then fully recharge
the pack. Proper care and charging will extend life of your battery
pack.
Maxon offers two chargers for use with the SP-300 Series radio.
Each model is sold separately and is available through your original
purchasing Dealer.
The QPA-1135 Pedestal Charger provides a slow overnight charge
of 12-16 hours. The charger has a single well which charges a radio
with battery attached.
The QPA-1130 Desktop Charger provides quick charging in 1.5 hours
and normal "slow" charging. The charger has two wells, one will
accommodate a radio with battery attached; the other is for a battery
removed from the radio.
Refer to the instructions accompanying each of these Maxon chargers
for more information.
SP-300 Series Operation
Power On-Volume
Turn the radio on by rotating the on /off - volume control clockwise
until you hear a click and the self test "alert" tone.
Transmit
CAUTION
OPERATION OF THE TRANSMITTER WITHOUT
A PROPER ANTENNA INSTALLED MAY RESULT IN
PERMANENT DAMAGE TO THE RADIO
1) Press the monitor button to monitor the channel for activity. To
avoid interrupting another user, make sure the channel is clear
before you begin transmitting.

Related product manuals