Maxon MODMAX MM-6280IND - Contact Information

70 pages

To Next Page

To Previous Page

CONTACT INFORMATION

Depending on the nature of your inquiry, please feel free to contact the following senior

personnel:

Sales, Marketing & Corporate:

Technical Support:

Phone: +61 2 8707 3000 Email: support@maxon.com.au

Sales:

Phone: +61 2 8707 3000 Email: sales@maxon.com.au

Main Page

Rf Exposure Compliance2
- Caution2
Revision History3
Contact Information4
Table of Contents5
1 Overview9
- General Description9
- Terms10
2 At Interface Description12
- Basic Integration12
- Serial Interface12
- Pin out12
- Command Format13
- Message Naming Convention13
3 Basic Interface Configuration14
- Baud Rate Set-Up14
- Serial Interface14
- USB Interface14
- IO Functions15
- AT Notification Options15
4 Signal Information17
- Mt Sms17
- Mt Data17
5 Interface Environment18
- MT2 Basic Operational State18
- Power Conservation Commands20
- Low Battery Voltage Notification22
  - SMS Low Battery Voltage Set Point (AT$$LOWBATT_VTG)23
  - Low Battery Notification (AT$$LOWBATT)23
- Visual/Audible Call Alert Options24
- Network Relational Settings25
6 Diagnostic Commands28
- Ring Test (AT$$DIAG_RING)28
- LED Test (AT$$DIAG_LED)28
- RSSI LED Response (AT$$RSSI_LEVEL)28
- Led Description29
7 Data Call Set-Up30
- Call Released or Failed (Uses DTR Pin)30
- Data Calls30
  - MO Data Call30
  - MT Data Call30
8 SMS Commands31
- General Configuration Commands31
9 SMS Processing Options46
- SMS Send and Receive Options46
- Auto Delete Messages in ME Memory48
  - Auto Delete Messages in ME Memory($$AUTO_DLTSMS)48
- SMS Notifications48
  - SMS Notification ($$SMSNOTIF)48
10 Modem SMS Remote Reporting49
- SMS Auto Voltage Alert49
- SMS Remote Report Requests50
11 NVM Vs. USER PROFILE STORAGE54
12 Tia/Eia/Is-707A at Command Set55
- User Modified Profiles & NVM Changes55
  - User Profile Store (At&Wn)55
  - User Profile Recall (At&Fn)55
- Basic at Commands56
- Extended at Command Sets60
  - Extended at Configuration Command Set60
13 Multiplexing65
- Rm3 (At$$Noti_Ds)65
14 Cellular Extended at Command Set66
- Cellular at Parameter Commands66
- Cellular Identification at Command Extensions67
- Cellular Result Codes for Asynchronous Data Services68
15 DM Command (Diagnostic Mode)69
16 Carrier Command Options70
- Debug Screen (AT$$DBGSCRN)70

Maxon MODMAX MM-6280IND - Contact Information

Table of Contents

Related product manuals