EasyManua.ls Logo

Maxon MODMAX MM-6280IND - Send Message Telstra SMS MO (AT+MMC); Write Message to Memory +CMGW

Maxon MODMAX MM-6280IND
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Extended AT Commands Manual Page 42 of 70 2009-06-25
message upon unsolicited delivery status report result code. If sending fails in a network or an ME
error, final result code +CMS ERROR: <err> is returned. See chapter Message Service Failure
Result Code for a list of <err> values. This command should be abortable.
Table 13. +CMSS action command syntax
Command Possible response(s)
+CMSS=<inde
x>[,<da>[,<
toda>]]
if text mode (+CMGF=1) and sending successful:
+CMSS: <mr>[,<scts>]
if sending fails:
+CMS ERROR: <err>
+CMSS=?
8.1.1.17. Send Message Telstra SMS MO (AT+MMC)
This section covers MT2 syntax requirements and options for MO SMS on the Telstra network.
Table 8-53 Execute command
Command TE2
Æ
MT2
+MMC<del>SMSMO<del><rcv_number><del><call_bac
k><del><msg><CR>
Description
<del>: space
<rcv_number>: Recipient number
<call_back>: Callback number (optional)
<msg>: Message, each byte of msg has to have the code larger than
0x1F, so it will be available with 0x20
Response TE2
Å
MT2 Before sending: +MMC SMSMO OK
Value
After sending: SENDING SUCCESS!: The SMS has been sent
SENDING FAIL!: Sending the SMS has failed
8.1.1.18. Write Message to Memory +CMGW
Execution command stores message (either SMS-DELIVER or SMS-SUBMIT) to memory storage
<mem2>. Memory location <index> of the stored message is returned. By default message status
will be set to 'stored unsent', but parameter <stat> allows also other status values to be given.
The entering of text is done similarly as specified in command Send Message +CMGS. If writing
fails, final result code +CMS ERROR: <err> is returned. See chapter Message Service Failure
Result Code for <err> values.
NOTE: SMS-COMMANDs and SMS-STATUS-REPORTs can not be stored in text mode.
Table 14. +CMGW action command syntax
Command Possible response(s)
if text mode
(+CMGF=1):
+CMGW[=<oa/
da>[,<tooa/
toda>[,<sta
t>]]]
+CMGW: <index>
+CMS ERROR: <err>
<Cmotech >
AT+CMGW="phone number",,"STO SEND","callback number"
AT+CMGW="phone number",,"STO UNSENT","callback number"

Table of Contents

Related product manuals