correct receive mode automatically.
NOTES:
When using inversion scrambling, all radios in a system must
have the special function button switched to the same state
to allow correct operation.
When using the rolling code scrambler, the PM100 will
automatically switch between clear and secure modes when
receiving a transmission. This transmits data at the start of
every transmission and the user should pause for about half-
a-second after depressing the PTT button before speaking
into the radio.
SOP55-01 FIXED SELCALL MODULE
If your radio has been upgraded with the SOP55-01 Selcall
Module, a range of additional signalling options is available.
These features can reduce the time spent receiving
messages meant for other radios and makes better use of
the radio channel.
With the Selcall option fitted, the operation of the radio will
change. An instruction sheet with further details on the
operation of the radio with Selcall is included with the
module.
ENGLISH
11
To Next Page
Loading...
