11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
13
4.
If needed, add ! uid to the reservoir as
follows. Remove " ller cap (FIG. 13-1).
Fill the reservoir with hydraulic ! uid to
the FULL mark (FIG. 13-1). Reinstall
" ller cap (FIG. 13-1).
POWER UNIT FLUID LEVEL
FIG. 13-1
5. Reinstall and latch the pump cover
(FIG. 12-1).
TABLE 13-2
TABLE 13-1
ISO 32 HYDRAULIC OIL
RECOMMENDED
BRANDS
P
ART NUMBER
CHEVRON HIPERSYN 32
KENDALL GOLDEN MV
SHELL TELLUS S2 V32
EXXON UNIVIS N-32
MOBIL
DTE-13M, DTE-24,
HYDRAULIC OIL-13
ISO 15 OR MIL-H-5606 HYDRAULIC OIL
RECOMMENDED
BRANDS
P
ART NUMBER
CHEVRON FLUID A, AW-MV-15
KENDALL GLACIAL BLU
SHELL TELLUS S2 V15
EXXON UNIVIS HVI-13
MOBIL DTE-11M
ROSEMEAD THS FLUID 17111
FILLER
CAP
RESERVOIR
CAUTION
Pump cover must be correctly se-
cured to prevent it from becoming
a hazard. Ensure pump cover is
latched to pump box.
FULL MARK
To Next Page
Loading...
