11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
15
4. Remove fi ller cap (FIG. 15-1)
. Add 1.85
gallons (7.4 qt) of hydraulic fl uid to
reservoir. Hydraulic fl uid should at the
FULL mark (FIG. 15-1). Reinstall fi ller
cap (FIG. 15-1).
CAUTION
Pump cover must be correctly
secured to prevent it from becom-
ing a hazard. Ensure pump cover
is latched to pump box.
6.
Reinstall and latch the pump cover
(FIG. 15-2).
5. Stow the lift and do the CHECKING
HYDRAULIC FLUID procedure in this
section of the manual.
REINST
ALL PUMP COVER
FIG. 15-2
PUMP COVER
LATCHES
(2 PLACES)
POWER UNIT
(REF)
POWER UNIT FLUID LEVEL
FIG. 15-1
FILLER
CAP
RESERVOIR
FULL MARK
To Next Page
Loading...
