Battery Attachment and Removal:
Belt clip installation: Belt clip attaches to
the back of the radio above the battery. To
attach the belt clip, align the belt clip to the
grooves on the back of the radio as shown the
figure 4-2 and push it down (arrow). Clip will
“click” when locked.
Belt clip removal: To remove the belt clip,
push the belt clip locking tab in (direction 1) &
pull the belt clip up (direction 2) at the same
time.
5. Charging the Battery
5.1 Safety Notes
1) TSD-4000 Series radios use a large capacity 2600 mAh Li-ion battery (TSA-4260). Use the
original battery and charger to ensure you are using safe and reliable equipment.
2) Please use a fully charged battery before using the radio for best performance and safety.
3) Please turn off the radio first to charge the battery.
5.2 When to Charge Your Battery
When your radio has low battery power, the distance it can communicate becomes shorter, and the
To Next Page
Loading...
