27
MAXPEEDINGRODS
(2)Air Induction System
· Controlled hot air intake system
· Intake manifold
· Air filter
(3)Ignition System
· Spark Plugs
· Magneto or electronic ignition system
· Spark advance / retard system
(4)Air Injection System
· Air pump or pulse valve
· Valves affecting distribution of flow
· Distribution manifold
(5)Catalyst or Thermal Reactor System
· Catalytic converter
· Thermal reactor
· Exhaust manifold
(6)Particulate Controls
· Traps, filters, precipitators, and any other device used to capture particulate emissions.
(7)Miscellaneous Items Used in Above Systems( Electronic controls
· Vacuum, temperature, and time sensitive valves and switches
· Dhoses, belts, connectors, and assemblies.
Evaporative Emission Warranty Part Lis
(1) Fuel Tank
(2) Fuel Cal
(3) Fuel lines ( for liquid fuel and fuel vapors)
(4) Fuel Line Fittings
(5) Clamps
(6) Pressure Relief Valves
(7) Control Valves
(8) Control Solenoids )
(9)Electronic Controls
(10) Vacuum Control Diaphragms
(11) Control Cables
(12) Control Linkages
(13) Purge Valves
(14) Gaskets
(15) Liquid / Vapor Separator
(16) Carbon Canister
(17) Canister Mounting Brackets
(18) Carburetor Purge Port Connector
Note: As they relate to the evaporative emission control system.
(e)Written instructions for the maintenance and use of the evaporative emissions control system by the
owner shall be furnished with eachnew engine or equipment subject to this Article. The instructions
must be consistent with this Article and applicable regulations contained herein.
To Next Page
Loading...