26
Chapter 5
Disassembly Guide
1-Disassembly Step
The laser belongs to the precise valuables, so Maxphotonics recommends the
following steps to unpack the packing box.
Please unpack according to the following steps:
(1) Place the package containing the laser device on a horizontal platform, such
as a oor or a large table;
(2) Open the main package and remove the foam cover;
(3) The ber is placed on the top plate of the laser. Please take it out carefully
to ensure that the maximum bending radius of the ber optic cable is >200mm.
When removing, it is recommended that the three people cooperate with each
other. Two people lift the laser body and the other person is responsible for
removing the cable.
(4) Remove the foam cover and take out the accessory.
(5) Please check the accessories according to the Packing List.
(6) Please keep all the items after unpacking in case of future transportation or
storage.
CAUTION:
◎
If any damage of the external package and internal parts has been found
upon receipt of product, please contact Maxphotonics Co., Ltd. or designated
agent immediately.
To Next Page
Loading...
Need help?
General
