33
Chapter 6 Operation Guide
IMPORTANT
：
◎
Do not reuse non-woven cotton or cotton swabs.
◎
Do not touch the protective lens of the fiber connector with your fingers.
◎
Do not blow directly with the mouth to protect the surface of the lens from
dirt, which may cause new dirt.
◎
Do not touch the tip of the cleaning swab with your fingers.
◎
Please don't forget to clean when you put back the protective cover and
sleeve.
◎
When using compressed air, do not blow dirt directly from the front. Use side
blowing to avoid dirt from entering the surface.
◎
If the fiber optic connector cannot be replaced immediately on the optical
component, cover the tail with a protective cover that has been cleaned with
compressed air.
Cleaning protective lens with swabs
To Next Page
Loading...
